This pool had a major case of “The Blues” covered in oxidized copper from low PH and Alkalinity that had eaten up the copper inside the heater
Most people will agree that your pool water should appear “blue”, all depending on the color of your tile and the water quality. But don’t mistake that for the FINISH being blue. That is usually a sign of something bad, especially if it is a plaster pool and you have a heater with a copper/nickel heat exchanger/coil. This pool was covered with oxidized metal. The light fixtures were all brown and the stainless steel didn’t even shine through anymore. We did an acid wash, along with re-grouting the tile, and can you almost mistake it for a new pool now!!!
Total process took 3 days, start to finish.
Pool had been left mostly empty for an extended period of time!! This is a huge mistake!
Difficult to see, but this is a crack in the finish where it blistered and separated from underneath!!!
After some extensive prep. we made sure that it was done the right way this time!!!!
